• Нов
CISCO Catalyst 2960 Plus 24 10/100...

CISCO Catalyst 2960 Plus 24 10/100 PoE + 2 T/SFP LAN Base

CISCO
WS-C2960+24PC-L
в наличност
5699,41 лв.
С вкл. ДДС
 
Комутатор, Catalyst 2960 Plus 24 10/100 PoE + 2 T/SFP LAN Base
    c45129c5-3b4b-4204-b6e8-be15efa1303e.jpg
Manufacturer CISCO
Manufacturer Part No WS-C2960+24PC-L
 
Marketing Description
The Cisco Catalyst 2960-Plus series switches are fixed-configuration Fast Ethernet switches that provide enterprise-class Layer 2 switching for branch offices, conventional workspaces, and infrastructure applications. They enable reliable and secure operations with lower total cost of ownership through a range of Cisco IOS software features, including Cisco Catalyst SmartOperations.
Product Features
  • Enterprise-class quality of service
    The Cisco 2960-Plus series switches offer intelligent traffic management that keeps everything flowing smoothly. Flexible mechanisms for marking, classification, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed.
  • Cisco Catalyst SmartOperations
    Cisco Catalyst SmartOperations is a comprehensive set of capabilities that simplify LAN planning, deployment, monitoring, and troubleshooting. Deploying SmartOperations tools reduces the time and effort required to operate the network and lowers total cost of ownership (TCO).
  • Cisco EnergyWise
    Cisco EnergyWise empowers IT teams to measure and manage the power consumed by devices connected to the network, providing measurable energy savings and reduced greenhouse gas emissions. EnergyWise policies can be used to control the power consumed by PoE-powered endpoints, desktop and data-center IT equipment, and a wide range of building infrastructure. EnergyWise technology is included on all Cisco Catalyst 2960-Plus Series Switches.
  • Power over Ethernet
    Cisco Catalyst 2960-Plus switches support IEEE 802.3af Power over Ethernet (PoE) to deliver lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet wireless access points, or other standards-compliant PoE end devices. PoE removes the need to supply wall power to PoE-enabled devices and eliminates the cost of adding electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments.
  • Network management
    The Cisco Catalyst 2960-Plus series switches offer a superior CLI for detailed configuration and administration. 2960-Plus switches are also supported in the full range of Cisco network management solutions.
General
Device Type Switch - 24 ports - Managed
Enclosure Type Rack-mountable 1U
Subtype Fast Ethernet
Ports 24 x 10/100 (PoE) + 2 x combo Gigabit SFP
Power Over Ethernet (PoE) PoE
PoE Budget 370 W
Performance Switching capacity: 16 Gbps
Forwarding performance (64-byte packet size): 6.5 Mpps
Capacity Active VLANs: 64
Jumbo Frame Support 9018 bytes
Remote Management Protocol SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP
Authentication Method RADIUS, TACACS+
Features Layer 2 switching, auto-sensing per device, dynamic IP address assignment, DHCP support, PoE, auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, RSTP support, MSTP support, DHCP snooping, DTP support, PAgP support, ACL support, QoS, LACP, Port Security, MAC Address Notification, RSPAN
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP)
RAM 128 MB
Flash Memory 64 MB
Status Indicators Port status, port transmission speed, port duplex mode, power, system, link/activity
Expansion / Connectivity
Interfaces 24 x 100Base-TX RJ-45 PoE - 15.4 W
2 x SFP
2 x 1000Base-T RJ-45
Power
Power Device Internal power supply
Voltage Required AC 120/230 V (50/60 Hz)
Features Redundant Power System (RPS) connector
Miscellaneous
Rack Mounting Kit Optional
Compliant Standards FCC Class A certified, CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN22, KN24, EN 300 386
Software / System Requirements
Software Included Cisco LAN Base software
Dimensions & Weight
Width 45 cm
Depth 33.2 cm
Height 4.4 cm
Weight 5.4 kg
Manufacturer Warranty
Service & Support Limited warranty - replacement - lifetime
Limited warranty - power supply and fans - 5 years
New releases update
Environmental Parameters
Min Operating Temperature -5 °C
Max Operating Temperature 40 °C
Humidity Range Operating 10 - 95% (non-condensing)
Min Storage Temperature -25 °C
Max Storage Temperature 70 °C
Humidity Range Storage 10 - 95% (non-condensing)
Product added to wishlist

С използването на сайта ни Вие се съгласявате с условията ни за "Бисквитките"